Click image to view full size image
I. INVERTER AIR PLASMA CUTTING MACHINE(5 YEARS WARRANTY & INTERNATIonAL QUALITY CERTIFICATE)
Model: CUT-30/40/60/70/100/120
II. MAIN TECHNICAL PARAMETER
| MODEL ITEM | CUT-30 | CUT-40 | CUT-60 | CUT-70 | CUT-100 | CUT-120 |
| Input power voltage,Frequency (V,HZ) | AC220(SINGLE PHASE)±10% 50/60 HZ | AC380(THREE PHASES)±10% 50/60 HZ | ||||
| Rated input power capacity (KVA) | 4 | 5 | 9 | 11 | 17 | 20 |
| No-load voltage (V) | 230 | 230 | 236 | 240 | 270 | 270 |
| Output current adjustment range (A) | 15-30 | 20-40 | 20-60 | 20-70 | 20-100 | 20-120 |
| Rated output voltage (V) | 92 | 96 | 104 | 108 | 120 | 128 |
| Rated duty cycle (%) | 60 | 60 | 60 | 60 | 60 | 60 |
| No-load loss (W) | 40 | 40 | 50 | 50 | 100 | 100 |
| Efficiency (%) | 85 | 85 | 85 | 85 | 0.93 | 0.93 |
| Pover factor (COSφ) | 0.93 | 0.93 | 0.93 | 0.93 | F | F |
| Arc-starting | CONTACT | CONTACT | CONTACT | UNCONTACT | UNCONTACT | UNCONTACT |
| Gas flow(M3/MIN) | 0.17 | 0.17 | 0.25 | 0.25 | 0.36 | 0.36 |
| Max cutting thickness (MM) | 7 | 12 | 23 | 25 | 30 | 35 |
| Weight (KG) | 7.5 | 9 | 19 | 21 | 35 | 38 |
| Measurement (MM) | 371x155x295 | 371x155x295 | 480x205x357 | 540x215x360 | 560x335x420 | 560x335x420 |
| Insulation class | F | F | F | F | F | F |
| Protection class | IP23 | IP23 | IP23 | IP23 | IP23 | IP23 |
III. CHARACTERISTIC
1. High cutting speed and low cost; Cutting speed is several times than traditional cutting machine.
2. Strong cutting penetration, narrow and smooth, no necessary for re-processing.
3. Adopting contacting(CUT-30, 40 & 60) or uncontacting(CUT-70, 100 & 120) arc starting cutting technology.
4. Able to cut many sort of metal such as stainless steel, copper, iron and aluminum etc
IV. STANDARD ACCESSORY LIST
1. A set of cutting torch.
2. A set of earth clamp with fast coupling device with 3 meters cable wire.
3. A set of gas regulator.
4. Two meters of gas carrying hose with two clips
INVERTER AIR PLASMA CUTTING MACHINE(5 YEARS WARRANTY & INTERNATIONAL QUALITY CERTIFICATE)
